| Customization: | Available |
|---|---|
| After-sales Service: | 1year |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product characteristics: (the accuracy Description column in the table is electrical performance parameters)
the stepper motor is equipped with 9-pin interface as standard, which can be automatically controlled by the company's motion controller.
the product structure is small and light, which is suitable for light load, low-speed use and scientific test.
high quality fine grinding lead screw drive, small lead, the same fine fraction can achieve high resolution.
the ingenious structural design of air elimination check nut can minimize the clearance of grinding lead screw pair.
the guide rail adopts cross roller guide rail, which is comfortable to move. It has the function of laterally adjusting the guide rail preload and eliminating clearance, and can be used in multi-dimensional combination.
the fine grinding of the bottom plate of the electric moving table and the reasonable fixing mode of the guide rail reduce the pitch and yaw of the electric moving table, and greatly improve the straightness and parallelism of the movement.
the stepping motor and grinding screw are connected through high-quality elastic coupling, with synchronous transmission, good depolarization performance, reduced eccentric disturbance and low noise.
equipped with hand wheel for easy commissioning.
limit switches are installed at both ends to facilitate accurate positioning and protection of products.
the base has threaded holes and through holes with standard hole spacing, which is convenient for installation and fixation.
|
Model Number |
PP110-15 |
PP110-30 |
PP110-50 |
PP110-75 |
|
|
Structure |
Travel |
15 Mm |
30mm |
50 Mm |
75 Mm |
|
Platform Size |
65×65mm |
90×90mm |
90×110mm |
90×110mm |
|
|
Screw Specification |
Grinding Screw Rod (Lead 1 Mm) |
||||
|
Guide |
Precision Cross Roller Guide |
||||
|
Stepper Motor (1.8 °) |
42Byg |
||||
|
Main Material |
Aluminium Alloy |
||||
|
Surface Treatment |
Anodizing Blackening |
||||
|
Table Bearing |
5kg |
15kg |
20 Kg |
||
|
Weight |
0.93kg |
1.25kg |
1.4kg |
1.7kg |
|
|
Accuracy |
Resolving Power |
5μ/ Pulse (No Subdivision) |
5μ((No Subdivision) 0.25μ(20 Subdivision) |
||
|
Maximum Speed |
5mm/sec |
10mm/sec |
|||
|
Repeat Positioning Accuracy |
2μ |
5μ |
|||
|
Positioning Accuracy |
10μ |
10μ |
|||
|
Straightness |
5μ |
8μ |
12μ |
||
|
Motion Parallelism |
20μ |
15μ |
|||
|
Pitch |
30″ |
25″ |
|||
|
Yaw |
25″ |
20″ |
|||
|
Return Clearance |
2μ |
2μ |
|||
|
Lose Step |
2μ |
2μ |
|||
|
Accessory |
Brake Function (-Z), Grating Scales (-G), Servo Motor (-D) |
||||
PP110-15
){kind=link}