| Customization: | Available |
|---|---|
| After-sales Service: | 1year |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Precision Electric Rotary Stage (worm gear): PX110-60
Product features:
the stepper motor is equipped with 9-pin interface as standard, which can be automatically controlled by the company's motion controller.
the rotating shaft system is precision machined by multi-channel technology, with high matching accuracy, large bearing capacity and long service life.
it adopts the worm gear and worm structure with precise research and matching, with comfortable movement, arbitrary forward and reverse rotation and small empty return.
the ingeniously designed air return structure can adjust the air return gap caused by long-term use.
the special structural design ensures the low end jump and eccentricity of the rotating table, making the rotating motion more stable.
the central through hole of the rotary table has strict requirements for coaxiality with the rotary center, and the central aperture of the rotary table has strict matching tolerance limits, which is convenient for customers to make precise positioning.
the scale circle on the periphery of the table is a laser marking scale, which can rotate relative to the table to facilitate initial positioning and reading.
through the coupling, the motor has high-quality elasticity and small synchronous noise, and the coupling reduces the eccentric transmission performance of the worm.
it can form a multi-dimensional electric adjustment table with other types of tables.
optional: add limit function, add initial zero position, replace servo motor, install rotary encoder, and accept product restructuring and customization.
the three-phase stepping motor or servo motor can be replaced to increase the speed and torque of the rotary table.
|
Structure |
Model Number |
PX110-60 |
|
Angle range |
360° |
|
|
Platform Size(mm) |
φ60mm |
|
|
Transmission Ratio |
45:1 or 90∶1 |
|
|
Drive Mechanism |
Worm Gear |
|
|
Travel Guide |
Bearing |
|
|
Stepper Motor (1.8°) |
42BYG |
|
|
Main Material |
Aluminium Alloy |
|
|
Surface Treatment |
Anodizing blackening |
|
|
Central Load |
30kg |
|
|
Weight |
1.2kg |
|
|
Accuracy |
Resolution |
0.02°(Non-MS Driver) 0.001°=3.6″(20 MS Driver) |
|
Speed |
50°/sec |
|
|
Repeatability |
0.005°=18″ |
|
|
Absolute Accuracy |
0.01°=36″ |
|
|
Run-Out of Top Plate |
15μ |
|
|
Backlash(μm) |
0.005°=18″ |
|
|
Eccentricity |
5μ |
|
|
Lost Motion |
0.005°=18″ |
|
|
Parallelization |
80μ |
Precision electric translation Stage (cross roller): PP110 - (30-75)
Product features:
the stepper motor is equipped with 9-pin interface as standard, which can be automatically controlled by the company's motion controller.
the product structure is small and light, which is suitable for light load, low-speed use and scientific test.
high quality fine grinding lead screw drive, small lead, the same fine fraction can achieve high resolution.
the ingenious structural design of air elimination check nut can minimize the clearance of grinding lead screw pair.
the guide rail adopts cross roller guide rail, which is comfortable to move. It has the function of laterally adjusting the guide rail preload and eliminating clearance, and can be used in multi-dimensional combination.
the fine grinding of the bottom plate of the electric moving table and the reasonable fixing mode of the guide rail reduce the pitch and yaw of the electric moving table, and greatly improve the straightness and parallelism of the movement.
the stepping motor and grinding screw are connected through high-quality elastic coupling, with synchronous transmission, good depolarization performance, reduced eccentric disturbance and low noise.
equipped with hand wheel for easy commissioning.
limit switches are installed at both ends to facilitate accurate positioning and protection of products.
the base has threaded holes and through holes with standard hole spacing, which is convenient for installation and fixation.
optional replacement of servo motor and grating ruler, and accept product restructuring and customization.
|
Item Number |
PP110-30 |
PP110-50 |
PP110-75 |
||
|
Structure |
Travel Range |
30mm |
50mm |
75mm |
|
|
Platform |
90mm x 90mm |
90mm x 110mm |
90mm x 110mm |
||
|
Bearing Construction |
Grinding Lead Screw (1mm of leading) |
||||
|
Travel Guide |
Crossed Roller Bearing |
||||
|
Stepper Motor (1.8°) |
42BYG (Stepping Motor with 2-Phases & 1.8° of Step Angle) |
||||
|
Material |
Aluminum Alloy - Black-Anodized |
||||
|
Load Capacity |
15kg |
20kg |
|||
|
Weight |
1.25kg |
1.4kg |
1.7kg |
||
|
Accuracy |
Design Resolution |
5μm/Pulse, Non-MS Driver 0.25μm/Pulse, 20MS Driver |
|||
|
Max Velocity |
10mm/sec |
||||
|
Repeatability |
5μm |
||||
|
Absolute Accuracy |
10μm |
||||
|
Straightness |
8μm |
12μm |
|||
|
Parallelization |
15μm |
||||
|
Pitching |
25" |
||||
|
Yawing |
20" |
||||
|
Backlash |
2μm |
||||
|
Others |
Optional Accessories |
Brake Function (-Z), Grating Scales (-G), Servo Motor (-D) |
|||
){kind=link}