Mplfln/Mplapon Uncovered Glass Objective Microscope Accessories

• Customization: Available
• After-sales Service: 1year
• Warranty: 1year
• Model NO.: MPLFLN/MPLAPON
• Transport Package: The Cartons
• Specification: MPLFLN/MPLAPON
• Trademark: PDV
• Origin: China Beijing
• Production Capacity: 1000

Product Description

 

Model	MPLFLN40X	MPLAPON60X	MPLAPON100XO2
Magnification	40	60	100
Numerical Aperture	0.75(N.A)	0.9(N.A)	1.45(N.A)
Working distance(MM)	0.63	0.4	0.1
Field(mm)	26.5	26.5	26.5
Thickness of cover glass (mm)	0	0	0
Infusion	Air / dry	Air / dry	oil
Spring	yes
Correction ring	Not applicable
Remarks (Correction Collar)			Not applicable
Aperture diaphragm	Not applicable		Apochromatic aberration(APO)
Correction level of color difference	Semi achromatic(FL)	Apochromatic aberration(APO)	45
Confocal distance(mm)	45	45	-19.1
Back focal plane(BFP)position(mm)	-19.1	-19.1	W20.32×0.706 (RMS)
Thread type	W20.32×0.706 (RMS)	W20.32×0.706 (RMS)	Insufficient
Bright field (reflection)	excellent
Bright field (transmission)	excellent		Not applicable
Dark field (reflection)	Not applicable
Dark field (transmission)	good	Not applicable
DIC(Differential interference difference)(reflex)	Not applicable		good
DIC(Differential interference difference)(transmission)	Insufficient		Not applicable
differ	Not applicable
Phase contrast	Phase contrast		good
Polarized light	Insufficient		good
fluorescence(B,Ginspire)	Insufficient		good
UVfluorescence (365nm)	Insufficient	Notapplicable
multiphoton	Not applicable
TIRF	Not applicable
IR	Not applicable
WLI	Not applicable
Auto focus (IX3-ZDC2)	Auto focus		N5702700
Product Number	N2699400	N2756500	1-UXB270
UPC Code	1-U2M527	1-U2M931

Precautions for using objective lens

1. Do not disassemble the parts of the microscope at will.

2. The optical part of the microscope should not be touched by hand.

3. Rotate the rotator above the objective lens when transforming the objective lens. Hand-held objective lens conversion is not allowed.

4. If you do not use the microscope for a long time, please turn the brightness of the electric light source of the microscope to the lowest level (maintain the life of the lamp).

5. When the specimen plate needs to be replaced, turn the object lens away from the loading platform and lower or place the specimen plate.

6. After the use of the microscope, it must be restored. The specific steps are as follows: first turn the converter to make the object lens leave the light hole, then take the subscript film, lower the loading platform, lower the condenser, close the aperture, return the slide mobile, adjust the brightness of the electric light source of the microscope to the darkest, then turn off the power, cover the silk cloth and outer cover, and finally put the microscope in the center of the table.